Tradewind 35 Gaff Cutter Rig

A very unique vessel
£38,000.00 (Approx US$48,250)
  • Boat REF#  ·  340262
  • LOA  ·  10.67m
  • Year  ·  1993
  • Construction  ·  GRP
  • Underwater profile  ·  Long keel
  • Berths  ·  6
  • Engine  ·  1 x Diesel 34hp, Perkins M35 (1993)
  • Lying  ·  gosport
Boatshed Portsmouth
Boatshed Portsmouth
Samantha Cassell

Extra Details

Designer John Rock
Builder Blondecell Marine Ltd Lymington
Lying gosport
Fuel capacity 181.0 ltr (39.8 G) Total - 1 Tanks
Water capacity 340.9 ltr (75.0 G) Total - 1 Tanks
Holding tank capacity 18.0 ltr (4.0 G) Total - 1 Tanks
Last survey 23/04/2018

Mechanical

Engine 1 x Diesel 34hp
Engine make and model Perkins M35 (1993)
Engine Hours Not Recorded
Engine Cooled Indirect
Steering Wheel
Drive Shaft
Prop(s) 3 blade fixed
Fuel consumption (approx) Not Recorded
Cruising speed (approx) 5 knots
Max speed (approx) 6 knots

Dimensions

LOA 10.67m
LWL 7.87m
Beam 3.32m
Draft Min 1.68m
Draft Max 1.68m
Displacement 8,819kg (19,445.9lbs)
Headroom 1.90m
Storage On marina

Rig

Gaff rigged Wood spars (1993) with stainless steel standing rigging ()

Sails

Mainsail - Slab () Stack Pack, Lazy Jacks, 3 Reefs
Headsail - Furling ()
Other sails Jib ()
Staysail ()
Gaff topsail ()

Laminated wooden mast

Aft Mainsheet track

Two Lewmar 48 self tailing cockpit & one Lewmar 16 ST on transom for mainsheet plus reefing 16 ST on boom in serviceable order

Electrical Systems

12 volt battery, 240 shore power voltage, 4 batteries charged by: engine, solar panels, shore power

Construction

Construction GRP
Underwater profile Long keel
Finish Paint finish

Accommodation

Total # of berths 6
No. of double berths 1
No. of single berths 4
Cabin(s) 1
Handbasin 1
Shower 1
Heads 1 heads (Manual)

Eberspacher cabin heating fitted unsure if working

2 burner gas cooker/stove

Accommodation

Cooker/stove
Grill
Oven
Sink
Refrigerator
Cabin heating
Pressurised water system
Hot water system

Eberspacher cabin heating fitted unsure if working

2 burner gas cooker/stove

Deck Gear

Sail cover
Sprayhood
Warps
Fenders
Boathook
Swim Ladder
Instrument Covers

2 halyard winches
2 sheet winches
Electric Lofrans windlass
2 anchors
(Plough)

Nav Equipment

Compass
Speed
Log
Wind
Radar
VHF DSC radio
GPS
Chart plotter
Autopilot
Navtex
Stereo
Clock
Barometer
Navigation lights
Echo sounder
Radar Reflector

Auto Pilot: Raymarine ST7000
ICOM ICMDSC VHF
Garmin GPS map 750
Furuno 1623 Radar
Wind & log Ratheon Autohelm

Safety Equipment

Life jackets
Life buoys
Safety harnesses
Boarding ladder

2 bilge pumps (2 manual / 0 Electric)

Broker's Comments

This is a 1993 standard Tradewind 35 hull which unusually has a gaff cutter rig with a downwind yard arm.

It has a forward double cabin with heads/shower to port. Two saloon settee berths plus a pilot berth to port and aft stbd quarter berth.

She was conceived by retired Royal Marine Ewen Southby-Tailyour.

The basic concept was to explore and cruise in the northern high latitudes coupled with commercially chartering the vessel to, for instance, ‘ographers, ‘ologists, ‘oligers, mountaineers or any such professional body. She would also be used in more local waters by my friends and young and growing family when not otherwise employed.

DESIRED SPECIFICATIONS
1. She had to be sailed single-handed when necessary.
2. She had to be gaff-rigged – a personal love.
3. She had to be strengthened for ice around the waterline. Not to break ice but to be able to manoeuvre among small floes and brash ice with impunity. Likewise the rudder had to be solid and not hollow.
4. She had to carry up to two-and-a-half tons of food, water, fuel and climbing stores. Up to three months of self-sufficiency away from civilisation was the aim.
5. She had to cross a squares’l yard for ease and comfort when downwind sailing.
4 She had to have a black hull for a cold-weather climate.
5. She was to be fitted with a police-approved gun-safe sized for one rifle and one 12-bore shot gun with space for the appropriate ammunition, including ‘polar bear’ shot.
6. She was to be fitted with a safe large enough for the ship’s papers plus the crew’s passports, money and valuables.
7. She was to be fitted with a radar fixed as high up the mast as was practicable. VHF of course. Wireless/CD/cassette player with repeat speakers in the cockpit. GPS was to be an afterthought as I had three sextants. Plenty of paper chart stowage would be needed.
8. Six bunks was the minimum preferred number, each with plenty of individual locker space and individual reading lights.
9. A self-draining wet locker adjacent to the companion ladder was necessary.
10. The galley to be equipped with a two-hob stove, grill and oven. A large tub-style fridge. Salt water hand pump in addition to the usual hot and cold water pressure taps.
11. Warm air heating throughout.
12. Navigation port and starboard sidelights to be in the shrouds and not at the truck of the mast.
13. Underwater hull fittings to be kept to a minimum.
14. Heads with shower, basin, hot and cold water taps with plenty of locker space for personal equipment.
15. Copious bookshelf(s) in the saloon and above the chart table which, at its smallest had to fit a once-folded Admiralty chart.
16. Construction in order of preference: wood, steel, aluminium, cement, grp.
17. Hull to be ‘copperbot’ coated - or similar.
18. She was to be fitted with a ‘bonded stores’ locker that could be sealed by the customs.
19. Three anchors, one to be Admiralty Pattern for anchoring in kelp.
29. She was to have a long keel with a keel-hung rudder.

Building actually started very early in 1993. The copperbot was moulded into the hull and did not need replacing for at least seven years. The hull was ‘thickened/strengthened for ice’ around the water line and the interior was as already designed.
Six berths was the standard Tradewind 35 layout in two cabins but the pilot berth on the port side of the saloon, the deep quarter berth on the starboard side abaft the chart table and one half of the double bunk in the fo’c’stle could be sacrificed for stores, in addition to the normal storage spaces. In full expedition mode ‘hot bunking’ was the norm!

In June 1993 she was entered for the Two Handed Round Britain and Ireland Race. Then COWES CLASSIC, 19TH SEPTEMBER 1993.
She was exhibited at the 1993 Southampton Boat Show and attracted much interest and following on from here journeys were :
GIRONDE 1995, ICELAND 1997, RBR 1998, ICELAND 2000, ICELAND 2002, FRENCH CANALS 2003 – 2004, THE JESTER CHALLENGE 2006, then cruised extensively among the Channel Islands and the north Brittany coast, but mostly along the Biscay coast for usually two or three voyages each summer until sold to her most recent owner Mark in 2011.

In her current ownership since 2011 her hull was painted green and she has mainly been sailed in The Solent and the Channel.

These boat details are subject to contract.
Note: Offers on the asking price may be considered.

Owners FAQ's

How long have you owned the boat for?

since 2011

Why are you selling her?

Personal circumstances

Where have you sailed her?

The Solent and Channel Islands

Where the particulars herein give details of a boat, whether new or used, they are intended to give a fair description of the vessel but are not guaranteed as accurate or complete. They shall not form part of any offer or contract for the sale of the vessel. The prospective purchaser is recommended to independently check the particulars and the vessel. The vendor is not selling in the course of a business unless otherwise stated. Personal property is excluded from the sale of the vessel unless specifically included in the listing specification above or in a purchase contract. Personal property may be equipment or gear not permanently attached to the vessel including but not limited to: artwork, entertainment equipment, fishing equipment, TV receivers, recreational equipment, kayaks, tools, and personal appliances. Photos that may incidentally depict owners' personal property do not convey that such items are included in the sale of the vessel unless such items are specifically listed herein. At all times, where the particulars herein give details of a new boat and/or a new boat to be supplied/built by a builder/manufacturer, or a boat to be chartered, via our introduction, we do not guarantee or assume responsibility for the accuracy or reliability of any information offered by third-party companies in respect thereof including without limitation new boat builders/manufacturers, charter companies and/or companies/businesses which are ‘Friends of Boatshed’. We shall not be responsible for, or party to, any transactions, contracts or agreements between you and such third-party providers of products or services and it is incumbent upon you to verify such details direct with such entities and contract with them at your sole discretion and on terms that you agree.